Anqiu San Kin Yip Dengfeng Welding Material Co.,Ltd
Contact US
ADD: No.8, Lingtang Road, Linghe Town, Anqiu City, Shandong Province, China
TEL: +86-536-4641209
FAX : +86-536-4641258
Home > Exhibition > Content
Agglomerated Flux for S. A. Welding
- Nov 08, 2017 -

Agglomerated Flux for S. A. Welding Product Detail

Agglomerated Flux for S. A. Welding.jpg


Agglomerated Flux for S. A. Welding Introduction:
Wd-sj301 is an agglomerated calcium-silicate type soldering flux for submerged arc welding with a basicity index of biiw 1.0. The flux is spherical granular, grain size is from 10 to 60 mesh. It has excellent welding technology
Properties.

Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpiedes without the risk of uncontrolled slag. Wd-sj301 can be welded with AC or DC at up to 1200a (single-wire process). The production of large pipes (especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained, thus allowing the flux be used with wires with a low mn content. The special production method ensures that the flux has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate.
Agglomerated Flux for S. A. Welding Applications
Flat butt and fillet welding for frames, bridges, spiral pipe, pressure vessels and ships.

Agglomerated Flux for S. A. Welding Characteristics
It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches. Welding defects such as pits and blowholes scarcely occur. Bead is smooth with beautiful appearance.